image

12 Heads Marble Polishing Machine For Slab

2100 MM 12 HEADS

MARBLE POLISHING MACHINE FOR SLAB

TECHNICAL SPECIFICATIONS

 

WORKING WIDTH

2100 mm

WORKING THICKNESS

10 / 100 mm

POLISHING HEADS

12 unıt

POLISHING PLATE DIAMETER

500 mm

POLISHING MOTOR POWER

11 kW 15 Hp 1500 Rev / Min

BRIDGE MOTOR POWER

2,2 Kw

BELT REDUCER

4 Kw

CONTROL SYSTEM

FULL PLC AUTOMATION CONTROL SYSTEM

MACHINE DIMENSIONS

 

WIDTH

2900 mm

LENGTH

11250 mm

HEIGHT

2150 mm

BELT WIDTH

2100 mm

Ø  Full automatic oiling system.

Ø  When the abrasives end the heads gets up automaticly and gives warning on the screen.

Ø  Has belt washing system

Ø  Weight ball and high speed balls are used in the heads.Therefore the high-speed ball is not damaged.

Ø  Belt engine has speed control system.

Ø  Flanges of The polishing heads are made aliminium.

Ø  The table was surfaced and made 25 mm thickness steel.

Ø  Body İron is made 380 NPI.

Ø  Aliminium flanges diameters 500 mm.

Ø  7 units abrasive can be montage on the aliminium flange.

Ø  Heads up and down automatically while the machine is mapping.

Ø  The polishing heads have pneumatic piston system.

Ø  The machine has Full Plc automation control system.

Ø  You can track all movements on the screen.

Ø  If there are broken edges the heads  polish the slab without move.

Ø  Electric system is SCHENIDER and The screen OMRON

Ø  Electric Dashboard will be montage 4 meters away from the machine.