2 HAND 3+12 POLISHING MACHINE
14 Heads Marble Polishing Machine For Slab
2100 MM 14 HEADS
MARBLE
POLISHING MACHINE FOR SLAB
TECHNICAL
SPECIFICATIONS
|
WORKING WIDTH |
2100 mm |
|
WORKING THICKNESS |
10 / |
|
POLISHING HEADS |
14 unıt |
|
POLISHING PLATE DIAMETER |
|
|
POLISHING MOTOR POWER |
11 kW 15 Hp 1500 Rev / Min |
|
BRIDGE MOTOR POWER |
2,2 Kw |
|
BELT REDUCER |
4 Kw |
|
CONTROL SYSTEM |
FULL PLC AUTOMATION CONTROL SYSTEM |
|
MACHINE
DIMENSIONS |
|
|
WIDTH |
|
|
LENGTH |
12500 mm |
|
HEIGHT |
|
|
BELT WIDTH |
|
|
Ø Full automatic oiling system. Ø When the abrasives end the heads gets up automaticly
and gives warning on the screen. Ø Has belt washing system Ø Weight ball and high speed balls are used in the
heads.Therefore the high-speed ball is not damaged. Ø Belt engine has speed control system. Ø Flanges of The polishing heads are made aliminium. Ø The table was surfaced and made 25 mm thickness
steel. Ø Body İron is made 380 NPI. Ø Aliminium flanges diameters 500 mm. Ø 7 units abrasive can be montage on the aliminium
flange. Ø Heads up and down automatically while the machine is
mapping. Ø The polishing heads have pneumatic piston system. Ø The machine has Full Plc automation control system. Ø You can track all movements on the screen. Ø If there are broken edges the heads polish the slab without move. Ø Electric system is SCHENIDER and The screen OMRON
Ø Electric Dashboard will be montage 4 meters away
from the machine. |
|
