2 HAND 3+12 POLISHING MACHINE
16 Heads Marble Polishing Machine For Slab
2100 MM 16 HEADS
MARBLE POLISHING MACHINE FOR SLAB
TECHNICAL SPECIFICATIONS
WORKING WIDTH | 2100 mm |
WORKING THICKNESS | 10 / |
POLISHING HEADS | 16 unıt |
POLISHING PLATE DIAMETER | |
POLISHING MOTOR POWER | 11 kW 15 Hp 1500 Rev / Min |
BRIDGE MOTOR POWER | 2,2 Kw |
BELT REDUCER | 4 Kw |
CONTROL SYSTEM | FULL PLC AUTOMATION CONTROL SYSTEM |
MACHINE DIMENSIONS | |
WIDTH | |
LENGTH | 13500 mm |
HEIGHT | |
BELT WIDTH | |
Ø Full automatic oiling system. Ø When the abrasives end the heads gets up automaticly and gives warning on the screen. Ø Has belt washing system Ø Weight ball and high speed balls are used in the heads.Therefore the high-speed ball is not damaged. Ø Belt engine has speed control system. Ø Flanges of The polishing heads are made aliminium. Ø The table was surfaced and made 25 mm thickness steel. Ø Body İron is made 380 NPI. Ø Aliminium flanges diameters 500 mm. Ø 7 units abrasive can be montage on the aliminium flange. Ø Heads up and down automatically while the machine is mapping. Ø The polishing heads have pneumatic piston system. Ø The machine has Full Plc automation control system. Ø You can track all movements on the screen. Ø If there are broken edges the heads polish the slab without move. Ø Electric system is SCHENIDER and The screen OMRON Ø Electric Dashboard will be montage 4 meters away from the machine. | |
